| 1 |
Preparation And Characterization Of Aluminium-Silicon Nitride (Al-Si3n4) Graded Composite System Under Different Sintering Cycles/Conditions |
Leader |
10-DEC-2020 |
09-DEC-2022 |
PGRS |
6,000.00 |
- |
| 2 |
Investigation On Physico-Mechanical Behavior Of Aluminium-Silicon Nitride Multi-Layered Graded Composites |
Leader |
01-JAN-2019 |
30-SEP-2021 |
FRGS |
75,430.00 |
- |
| 3 |
Investigation Of Wear Characteristics Of Hot Press Forming Die |
Leader |
15-OCT-2018 |
14-JUL-2021 |
FLAGSHIP |
18,050.00 |
- |
| 4 |
Development Of Magnetorheological (Mr) Fluid With Enhanced Thermal Property For Heat Dissipation Device |
Leader |
25-MAY-2017 |
24-MAY-2019 |
GERAN DALAM |
22,000.00 |
- |
| 5 |
InvestigationOfMicro-AbrasionBehaviourOfNano-CeramicInMagneto-RheologicalPolishingFluid. |
Leader |
01-AUG-2016 |
31-JUL-2019 |
FRGS |
111,708.00 |
- |
| 6 |
Development Of A Magnetorheological Pinched Mode Valve For Automotive Semi-Automotive Semi-Active Suspension System |
Leader |
05-MAY-2016 |
04-MAY-2018 |
GERAN DALAM |
24,500.00 |
- |
| 7 |
Development Of New Class Of Magnetorheological (Mr) Material Of Extreme Temperature Applicatiion With Optimized Component Configuration |
Leader |
25-DEC-2014 |
24-DEC-2017 |
PGRS |
3,500.00 |
- |
| 8 |
Enhancement Of Stress Resistance In Squeezed Mode Mr Fluid Through Optimization Of Materials Parameters |
Leader |
17-SEP-2013 |
16-SEP-2015 |
RAGS |
51,342.00 |
- |
| 9 |
Investigation Of Parameter Effect On Fatigue Strength Of Aluminum-Silicon Die Casting Alloy From Ultrasonic Shot Peening |
Member |
01-MAY-2022 |
30-APR-2024 |
GERAN DALAM |
39,880.00 |
- |
| 10 |
Atomic Diffusion In Superhydrophobic Laser Modified Glass Surface For Light Transmission Properties |
Member |
07-SEP-2021 |
06-SEP-2024 |
FRGS |
134,101.00 |
- |
| 11 |
Experimental Study Of Nozzle Influence On Oil Mist Adhesion After Milling Process Of Automotive Parts |
Member |
25-AUG-2018 |
24-NOV-2020 |
GERAN DALAM |
37,100.00 |
- |
| 12 |
Effect Of Oil Sludge Contamination Onto Dynamically Contacted Surface Between Piston And Cylinder Inside Diesel Engine |
Member |
25-AUG-2018 |
24-NOV-2020 |
GERAN DALAM |
32,500.00 |
- |
| 13 |
Development Of Ball Tip Milling Magnetic Abrasive Finishing To Improve Surface Finish Of Biocompatible Materials |
Member |
01-APR-2018 |
30-JUN-2020 |
GERAN DALAM |
26,500.00 |
- |
| 14 |
Machinability Study Of Structural Automotive Alloys Using Abrasive Waterjet Machining Process |
Member |
20-SEP-2017 |
19-SEP-2019 |
GERAN DALAM |
25,000.00 |
- |
| 15 |
Effect Of Lubrication Oil Thickness On Minimum Quantity Lubrication (Mql) Parameter In Turning Process |
Member |
20-JUN-2017 |
19-JUN-2019 |
GERAN DALAM |
21,900.00 |
- |
| 16 |
Integration Of Fine Particles In Laser Modified Tool Steel Surface For Thermal Stability Of Grain Boundary |
Member |
01-AUG-2016 |
31-JUL-2019 |
FRGS |
112,800.00 |
- |
| 17 |
Development Of Hot Press Forming (Hpf) Die With Laser Cladding Surface For Thermal Stability |
Member |
25-JUN-2016 |
24-JUN-2018 |
GERAN DALAM |
30,500.00 |
- |
| 18 |
Smart Traffic System For Universiti Malaysia Pahang Pekan Campus |
Member |
24-MAY-2016 |
23-MAY-2018 |
GERAN DALAM |
40,000.00 |
- |
| 19 |
Effects Of Thermal Oxidation Parameters To The Efficiency Of Zinc Oxide And Tin Dioxide As Anti-Reflective Coating In Silicon-Based Solar Cell |
Member |
01-DEC-2015 |
30-NOV-2017 |
RAGS |
52,608.00 |
- |
| 20 |
Aluminium (Al) 6061 Alloy Metal Matrix Composites Reinforced With Fly Ash Particles (Faps) And Carbon Nano Tube (Cnt) For Automotive Component |
Member |
01-OCT-2015 |
30-SEP-2017 |
GERAN DALAM |
32,986.00 |
- |
| 21 |
Development Of Thermal Wear Test System For Casting Die In Automotive Components Manufacturing |
Member |
25-DEC-2014 |
24-DEC-2016 |
GERAN DALAM |
32,160.00 |
- |
| 22 |
Development Of Self-Healing Composite Structures |
Member |
15-NOV-2014 |
14-NOV-2016 |
GERAN DALAM |
30,500.00 |
- |
| 23 |
Enhancing The Electrical Discharge Machining Of Metallic Reinforced Ceramic Composites |
Member |
01-DEC-2013 |
01-MAY-2016 |
GERAN DALAM |
25,960.00 |
- |
